Recessed pocket for holding
the ESC in place. Intended to be used with the fan.
Recessed switch to reduce accidental turn on/off.
Does not block air flow. Made
of durable plastic.
Mounting widths that match both VXL and Mamba Monster
Max ESC bolt patterns!
Compatible with little to no
modification:
New LCG Chassis: motors upto 55mm in length RX box in stock position
Original Chassis: motors upto 60mm in length with the stock RX box
New LCG Chassis: motors upto 55mm in length RX box in stock position
- Traxxas 2wd Stampede
- Traxxas 2wd Slash
- Traxxas Rustler (with VLX
ESC tray)
- Traxxas Bandit (with VLX ESC
tray)
- Losi SCTE
Instructions
Drill and tap the holes on the switch for M3 (or you will damage the switch).
Install the switch into the top mounting plate using the short screws.
Do NOT overtighten the screws (or you will damage the switch).
Place the mount on top of the ESC with the switch
side matching
the side where the switch wires come out of the case.
Drill and tap the chassis M3 if needed.
Install the long screws to secure the ESC to the chassis.
Do NOT overtighten the screws or you can damage parts.
Kit includes:
- One mounting plate for the
top made of durable plastic
- Two 12.9 grade metric hex
ESC mounting screws
- Two 12.9 grade metric hex
switch mounting screws
- SnappyRC sticker
RX8 is property of Tekin
Slash, Rustler, Stampede and Bandit, eMaxx, eRevo, and Summit
are property of Traxxas
SCTE and Losi are property of Horizon Hobby
